Installing the Timer
Using a small screw driver, remove the bottom screw from the wall switch you want the unit to operate. Place the unit directly over the switch plate cover. Open the unit and align the hole inside the unit just below the tab area with hole in the switch plate cover with the removed screw. Fasten the unit to the switch using the longer screw provided with your timer. Your unit is ready to operate.
|
 |
Using the Timer
Be sure to slide the timer's toggle switch tab to the far left to engage the timer. If the tab remains in the far right position, the unit will not engage the switch and will not be able to turn the switch off and on at the programmed times.
|
 |
Manual Override
Push the ON or OFF button on the unit to turn the switch on or off as desired between programmed settings OR slide the timer's toggle switch tab to the far right to disengage the timer from the switch. You can then manually flip the toggle switch on or off as desired between programmed settings.
NOTE:
If the toggle switch tab remains disengaged, it cannot turn switch on or off at programmed times.
|
 |
Resetting The Timer
To reset the timer and erase all preset programs, use a pointed object, such as a straightened paper clip, to gently press down the timers reset button. The display clears. The LCD will flash AM 12:00, AM (Monday), AUTO and OFF.
NOTE: Before you use the timer again after resetting it, be sure you set the current time.
|
 |